Lumijes Technologies is seeking an Embedded Systems Software Engineer to build and take ownership of the core platform used to integrate robots, sensors, and cameras into a deterministic and safe system for clinical use.
Key Responsibilities
- Own the foundation that the rest of the platform runs on.
- Bring up, test, and debug new PCBs by reading schematics and layouts and using lab tools to distinguish hardware faults from software faults.
- Write low-level firmware for MCUs in bare-metal or RTOS environments.
- Develop device drivers for embedded Linux platforms and SOMs, including NVIDIA Jetson and AMD Kria.
- Implement and tune real-time data protocols across the robot, including CAN/CAN FD, EtherCAT, I2C, SPI, UART, USB, and Ethernet.
- Integrate cameras (GMSL, MIPI CSI-2), LiDARs, IMUs, encoders, and motor controllers into synchronized data pipelines with deterministic timing.
- Build watchdog mechanisms, safe-stop routines, telemetry logging, and hardware-in-the-loop (HIL) test fixtures to support clinical field reliability.
- Collaborate with electrical, mechanical, controls, and robotics software (ROS/ROS 2) engineers to balance power, thermal, and bandwidth constraints.
- When a new board arrives, bring it to life and validate it through testing.
- Diagnose failures by determining whether the root cause is hardware or software, then implement fixes.
Required Qualifications
- 5+ years of professional embedded systems experience, including hardware bring-up and shipping work.
- Strong C and C++ skills for firmware and drivers, along with practical Python experience for test automation and scripting.
- Experience with microcontrollers and RTOS environments such as ARM Cortex-M with bare-metal or RTOS systems (FreeRTOS, Zephyr, or ThreadX) and/or platforms like STM32 or ESP32.
- Embedded Linux experience, including kernel configuration, device trees, U-Boot, and board support packages (BSPs).
- Hands-on capability using oscilloscopes, logic analyzers, protocol analyzers, and JTAG/SWD debuggers.
- Practical experience implementing serial and field bus interfaces such as CAN, EtherCAT, I2C, and SPI.
- B.S., M.S., or Ph.D. in Computer Engineering, Electrical Engineering, Robotics, or a related field.
Technologies You Will Work With
C, C++, Python, ARM Cortex-M, STM32, ESP32, bare-metal, FreeRTOS, Zephyr, ThreadX, embedded Linux, kernel configuration, device trees, U-Boot, BSPs, NVIDIA Jetson, AMD Kria, CAN, CAN FD, EtherCAT, I2C, SPI, UART, USB, Ethernet, GMSL, MIPI CSI-2, LiDARs, IMUs, encoders, motor controllers, watchdogs, safe-stop routines, telemetry logging, hardware-in-the-loop (HIL) test fixtures, ROS, ROS 2, oscilloscopes, logic analyzers, protocol analyzers, JTAG, SWD debuggers, PCB, Altium Designer, KiCad, TF, sensor topics, NVIDIA Isaac Sim, MuJoCo, MoveIt, cuRobo.
Nice to Have
- ROS/ROS 2 middleware and robotics data streaming experience (TF, sensor topics).
- Experience with robot simulation and motion planning tools such as NVIDIA Isaac Sim, MuJoCo, MoveIt, or cuRobo.
- PCB design experience using Altium Designer or KiCad, including the ability to suggest schematic fixes with confidence.
- Knowledge of motor control (PID, encoder feedback) and power electronics.
- Experience deploying mobile robots, drones, or autonomous systems into unstructured, real-world environments.
Application Details
- Apply directly through Indeed, or email joinus@lumijes.com with examples of your work.
- Avoid a generic application. Share something you have brought to life, such as a board bring-up, firmware you are proud of, or a hardware bug you tracked down and how you resolved it.
- If the work is under NDA, describe the problem and your approach.
- What you can do is prioritized over what your résumé says you might be able to do.
- Application question: this role is located in Gainesville, FL. Are you living in this area currently or planning to move soon?
Location and Work Mode
Gainesville, FL 32601 (onsite). Work location: in person.